china valve

 

首页 关于我们 产品展示 新闻中心 经典应用 人才中心 联系我们 English
  球阀  |  闸阀  |  蝶阀  |  截止阀  |  止回阀  |  减压阀  |  电磁阀  |  调节阀  |  旋塞阀  |  疏水器(阀)  |  过滤器  |  隔膜阀  |  安全阀  |  针型阀 仪表阀  |  放料阀  |  给排水阀门  |  阻火器  |  呼吸阀  |  节流阀  |  底阀  |  角座阀  |  气动管路阀门  |  平衡阀  |  排泥阀  |  排气阀  |  切断阀  |  保温阀  |  电站阀门  |  油田阀门  |  气动阀门  |  电动阀门  |  视镜 视盅  |  刀闸阀  |  进口阀门 英国UK优科阀门  |  进口阀门 德国托普TOP阀门  |  阀门技术资料参数  |  进口阀门  |  阀门概述  |  阀门法兰标准  |  阀门选型资料  |  阀门使用说明书  |  进口阀门-美国富特VT阀门  |  进口阀门 日本北泽KITZ阀门  |  进口阀门 日本阀天VENN阀门  |  阀门价格表  |  阀门简介  |  阀门厂  |  美国YOCO进口阀门  |  进口阀门 德国韦恩WAYEN阀门  |  暖通控制阀  |  阀门
请输入产品关键字
网站地图

|

在线咨询
您现在的位置:上海仙蝶阀门有限公司 - 产品展示 - 截止阀说明书
截止阀说明书
截止阀说明书
型号: J41H,J41Y,J44H,J45
口径: DN10-DN400
压力: PN16-PN320
材质: 铜,铸铁,球墨铸铁,铸钢,不锈钢,铬钼钢
『总记录1条』『每页10条』『当前1/1页』  首页  上一页   下一页  末页
 
截止阀说明书概述
一、用途该系列截止阀是用来接通或截断管路中的介质,启闭件沿阀杆的旋转上下移动,实现开启和关闭,适用于多种公称压力及各种工作温度的石油、化工、电力等系统的设备管道中。二、安装、使用及维护 1、本阀应存放在干燥的仓库里,严禁露天或堆迭存放。 2、长期存放的阀门应定期检查,清除污垢。 3、检查填料压盖是否均匀地压紧填料,应保证填料的密封性和不得妨碍阀杆的转动。 4、安装前应仔细核对使用情况是否与本阀门性能相符。 5、可安装与任何工作位置,但需要注意操作、检修或更换上的方便。 6、截止阀不允许作为调节流量使用,只能作为关闭或开启管路之用,在使用时阀瓣只能全开或全闭。 7、安装时,应使介质的流向与阀体上所指箭头的方向一致。 8、应靠旋转手轮使阀门开启或关闭,不得借助于其他辅助杠杆。 Stop Valves 1. Purpose The series of stop valves are used to connect and stop the mediums in the pipes. The headstock gear moves up and down along with the valve levers so that it can open and close. They apply to the pipes of petroleum, chemical and electrical systems in the nominal pressure and all operating temperatures. 2. Installation, Operating and maintenance (1) The product should be stored in dry storehouses. It can not be put outside or piled up. (2) The valves stored for a long time should be examined and cleaned at regular intervals. (3) Check whether the filling cover tightly presses the fillings and to insure the sealing and at the same time, it can not interfere with the rotation of the valve levers. (4) Check carefully whether the specification of the valves used according with the conditions before the installation. (5) It can be installed at any positions but should be easy for operation, checking and replacement. (6) The stop valves can not be used to adjust the flow of the pipes. It can only be used to close and open the pipes, and it can only be fully opened and closed. (7) While installing, the direction of the medium should be the same as the arrows on the valves. (8) The opening and closing of the valves should be done by turning the handwheel. It cannot be dependant on other auxiliary levers.

Copyright 2006 上海仙蝶阀门有限公司 All Rights Reserved.沪ICP备10020918号 阀门 进口阀门 上海阀门厂 阀门公司
地址:上海市嘉定工业园区胜辛路 电话:021-51873926(3线) 24小时服务电话:15216666200 传真:021-51873926
友情链接:阀门 阀门厂 阀门网 阀门公司

www.gLeeksite.com www.gLeeksite.com